Reply To: Preview 3.1.0: Extended Mackie MCU support

@rwelteroth wrote:

Hi Frits,

beta4 works (almost) as expected. The indicated channels can now be controlled by the respective channel on the controller no matter wether there are effects or not. Only the visible channels can be controlled. If I change visibility of channels for example by opening or closing a group channel, channel assignment is adjusted (ok at least to my needs).
Only thing I would change is that neither the master channel nor return channels can be assigned to the controller (or am I missing anything?). At least the possibility to control the return channels would be nice.
Maybe it’s alright for 3.1.0 right now but as you are currently working on this, some more improvements might be welcome and maybe also quite easy to implement (one idea that comes to mind here is the option to fix the master channel to controller channel 1 while assigning the other controller channels dynamically).

Greetings
Richard

Thanks for testing. Please try beta5. I’ve set the inclusion of master and bus tracks as default, and only if the device is a genuine MCU (with its own separate master fader) will the master track be deselected from the main faders. Track 1 should then be the master track on the NanoKontrol2. It won’t lock fader 1 to the master track, since this will stray too far away from MCU compatibility I think. Let me know if there are other minor issues that needs to be corrected.